$14.99
Solar Seal #900 is an engineered Terpolymer adhesive that will bond concrete and Trim-A-Slab.
If you wish to make an installation permanent, or to prevent any shrinkage in length, apply Solar Seal to the Trim-A-Slab anchoring beams (the part you won’t see after installation that holds the Trim-A-slab in place) for 6-8 inches on each end of each piece. You alternatively can apply to the concrete below the surface, and press the trim-A-Slab into it.
Working time is 20 minutes; you have 20 minutes to adjust and move Trim-A-Slab around before the adhesive starts to act.
Color is clear.
10 oz. tube for standard caulking dispensers.
Solar Seal #900 is an engineered adhesive that will bond to concrete and Trim-A-Slab.
10 oz. tube
Color is clear.
Use to make a Trim-A-Slab installation permanent.
Concrete must be cleaned of dirt and foreign substances; wire brush the concrete to get a good bond.
20 minute working time, weatherproof after cure (24 hrs).
Solar Seal contains solvents; for exterior uses only. Prevent skin or eye contact during use. Cured product is inert.
